GTRPWR Forums  

Go Back   GTRPWR Forums > General > Tech Discussion


Reply
 
Thread Tools Display Modes
Old 09-26-2013   #1
TurboSE
RB20DE
 
Join Date: Dec 2009
Location: Hanover, Pa 17331
Posts: 36
My Ride: S13/RB26DETT
iTrader: (0)
Default AAC Hose routing ?'s

I'm reassembling the intake side of my motor. Most of the hoses weren't connected when I bought it, and I'm not sure where they go.



What I think:

1: Brake booster - I'm running a boosterless master cylinder, so can I just block this?

2: Small nipple on plenum. - This is pinched a bit on mine, can I use #1 instead?

3 & 4: Large nipples on plenum.

5: BOV

6:?

I appreciate any help!
__________________
WANTED:
RB25DET OS Giken STR clutch.
RB25DET Ikeya Formula shifter
RB26DETT 700cc Injectors

Last edited by TurboSE; 09-26-2013 at 03:15 PM.
TurboSE is offline   Reply With Quote
Old 11-24-2013   #2
Mr666
RB20DET
 
Mr666's Avatar
 
Join Date: Jan 2010
Location: Surrey, BC
Posts: 65
My Ride: 89' GTR - R32 Kit Car
iTrader: (0)
Default Re: AAC Hose routing ?'s

here is the page for it.


next you need to cut the pipes.


then lengthen the brake vacuum hose just a little more than i have here.


then by a new and longer hose for the brake booster.


and then don't forget about the idle controller electrical connection like I did and had a spare plug left over when it was all finished. Of course it is behind the vacuum air chamber and you have to remove everything you just put in to get to it.


You will find you need to undo the brake master cylinder and lift it up to work in here. the fuel filter gets in the way so take it out for the time being. use mirrors to get to the screws.

next get an oil filter relocation kit because your not going to be able to get the filter out after that is installed.


The manifold sits more forward and wider so it blocks the filter when you try and get it out.
__________________
I'm addicted to HORSE POWER and I love " Dial a HP "

Last edited by Mr666; 11-24-2013 at 10:05 AM.
Mr666 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -7. The time now is 08:36 PM.


Design By: Miner Skinz.com
Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.