GTRPWR Forums  

Go Back   GTRPWR Forums > Marketplace > Vendor Marketplace > VEX Performance


Reply
 
Thread Tools Display Modes
Old 01-14-2010   #1
RWDragoon
Vendor
 
Join Date: Jun 2009
Location: Calgary and Red Deer
Posts: 131
My Ride: Racing, building fast car
iTrader: (0)
Default Haltech R32 / R33 Pro ECU Information


Haltech Engine Management Systems have been manufacturing and designing aftermarket ECU's longer then anyone. They developed one of the first aftermarket ECU's in the world in 1986. They offer top notch support, and products for nearly every level of performance.

Haltech Platinum Pro ECU's are one of the most powerful Plug-n-Play Complete Engine Management Systems for your Skylines you can buy! It offers the fastest processor Haltech makes. The software is excellent and the most user friendly around! It is completely customizable to suit your (or your tuners) needs.

Haltech does not limit who can tune your car (We Highly recommend a professional!) Your ECU's tune and settings can be Password Locked if you so choose.


Supported Cars:

Nissan Skyline R32 with RB25DET
Nissan Skyline R33 with RB25DET

Nissan Skyline GTR R32 with RB26DETT
Nissan Skyline GTR R33 with RB26DETT



Features:

• Direct plug and play replacement of the OEM ECU, no rewiring necessary.
• Uses the cars factory sensors
• Supports R32 GT-R twin MAF sensors
• Supports Sequential Injection (peak and hold) and Direct fire ignition
• Windows 2000, XP, Vista compatible software
• Real time programming, instant hesitation free adjustment while engine is running
• Fully user definable 32 x 32 mapping
• Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
• Selectable on-board internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
• Wideband “auto tuning” using user definable target AFR table
• USB and CAN Communication Port
• Fully Tunable Knock Detection with ability to retard timing if knock is detected.
• Plug and Play with Haltech / Racepak IQ3 Dash!

Factory Outputs:

• 6 x Fuel Injector outputs
• 6 x Ignition outputs
• Tacho, Boost Control, AC Clutch Relay, Idle Control
• Thermo Fan, Check Engine Light, Fuel Pump (Variable Speed)
• N-VCT ( Nissan Variable CAM Timing Control)

Factory Sensor Inputs:

• OEM MAF sensors, Throttle Position Sensor, Oxygen sensors,
• Coolant Temperature sensor, Vehicle Speed Sensor,
• Air Temperature sensor.
• Knock Sensors

Optional Harness Auxiliary Inputs / Outputs

• 2 x Analogue Voltage inputs
• 2 x Analogue Temperature inputs
• 4 x Digital pulsed outputs

These Inputs and Outputs can be configured to input / output many things, some of which are:

Inputs:
Flat Shift
NOS Enable
Fuel Pressure Sensor
External Map Sensor
Oil Pressure Sensor
Exhaust Gas Temperature Sensors
Oil Temperature Sensors

Outputs:
Aux Fuel Pump
Coolant Temperature Switch
Generic Duty Output

Functions:

• Closed Loop 02 Control
• Closed & Open loop Boost control
• Over Boost cut (either fuel or ignition)
• Rev Limited (Ignition or Fuel cut soft or hard)
• Boost per gear

Correction Tables: Fuel / Ignition / Boost:

• Cranking
• Air Temp Target Correction
• Coolant Temperature Correction
• Map Correction
• Zero Throttle Gear Correction
• Cylinder Trim
• TPS Correction
• Generic Correction 1
• Generic Correction 2
• Gear Correction
• Post Start
• Air Temp Duty Correction
• Post Start

Miscellaneous:

• Data Logging: 448Kb of on-board data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
• Max 20 channels logging capability
• Tune can be password protected in software
• Rugged anodized aluminum casing

PM or Email for pricing or questions
__________________
-Ryan
ryan@VEXperformance.com
1.855.VEX.PERF
403.243.1111


Authorized Dealer / Distributor / Tuner:
Haltech Engine Management Systems
OS Giken
Tomei
TiAL Sport
Garrett
Motul
RWDragoon is offline   Reply With Quote
Old 01-14-2010   #2
mcfly
KPGC10
 
mcfly's Avatar
 
Join Date: Jun 2009
Location: Vancouver
Posts: 3,213
My Ride: 20B cosmo
iTrader: (4)
Default Re: Haltech R32 / R33 Pro ECU Information

what does the plug and play roughly cost?
__________________
If you're not first you're last

mcfly is offline   Reply With Quote
Old 01-14-2010   #3
RWDragoon
Vendor
 
Join Date: Jun 2009
Location: Calgary and Red Deer
Posts: 131
My Ride: Racing, building fast car
iTrader: (0)
Default Re: Haltech R32 / R33 Pro ECU Information

We sell them for $1595US and the auxiliary harness is around $40US

I wont install without a proper wideband

Special Pricing for the first guy to order one!
__________________
-Ryan
ryan@VEXperformance.com
1.855.VEX.PERF
403.243.1111


Authorized Dealer / Distributor / Tuner:
Haltech Engine Management Systems
OS Giken
Tomei
TiAL Sport
Garrett
Motul
RWDragoon is offline   Reply With Quote
Old 01-14-2010   #4
mcfly
KPGC10
 
mcfly's Avatar
 
Join Date: Jun 2009
Location: Vancouver
Posts: 3,213
My Ride: 20B cosmo
iTrader: (4)
Default Re: Haltech R32 / R33 Pro ECU Information

Does it have the ability to run 6 egt's?
__________________
If you're not first you're last

mcfly is offline   Reply With Quote
Old 01-14-2010   #5
RWDragoon
Vendor
 
Join Date: Jun 2009
Location: Calgary and Red Deer
Posts: 131
My Ride: Racing, building fast car
iTrader: (0)
Default Re: Haltech R32 / R33 Pro ECU Information

The Haltech by itself can handle 2 EGT inputs. You could use a Racepak dash and datalog 6+ EGT's
__________________
-Ryan
ryan@VEXperformance.com
1.855.VEX.PERF
403.243.1111


Authorized Dealer / Distributor / Tuner:
Haltech Engine Management Systems
OS Giken
Tomei
TiAL Sport
Garrett
Motul
RWDragoon is offline   Reply With Quote
Old 01-14-2010   #6
Allan74
Banned
 
Join Date: Jan 2010
Posts: 0
iTrader: (0)
Default Re: Haltech R32 / R33 Pro ECU Information

Quote:
Originally Posted by RWDragoon View Post
The Haltech by itself can handle 2 EGT inputs. You could use a Racepak dash and datalog 6+ EGT's
I sure don't like that......for guys who may not want to run the Dash setup.
Remember, the so-called awful AEM can manage 4 EGT's
Allan74 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -7. The time now is 10:42 PM.


Design By: Miner Skinz.com
Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.