What did you do to your car today?

[Rapier46]

I work on mine everyday just about.


What did you do to yours today?

Today I diagnosed and fixed my blue smoke problem. I got my greddu suction kit all on, and I had blocked off my exhaust valve pcv valve. ... When I really jammed on it and the crank case pressured up, oil would squirt out onto the exhaust and burn off bigtime blue.

So that was nice to fix :)

what about you guys

[4jo3]

inspected my turbos -> thankfully they are in perfect shape, ripped apart my head to find that an intake valve guide broke. my head is now bare.

[inhumane]

hooked up the turbo timer and gave the car a clean inside :D

[Zacho]

Nothing :( Nobody in this city seems to carry mandrel bent tubing at a decent price. One shop said $145 for a 3 inch diameter 90 degree bend with 6 inch legs...

However I did wash my truck, forgot it was light grey.

[Funnygas]

Well I only get to work on mine on weekends for a few hrs...
Today:
test fitted wheels since there has been suspension changes
cleaned out more pieces of broken plastic and power steering belt from the engine bay.
Re located heater controls under cd player.
Made a triple gauge din plate to go in place of heater controls
wired up gauge back lights, and wired up volt meter.
finally wired parking brake wire to turbo timer
fixed grounding issue on my sirius radio, re-routed sirius controller wire
cleaned the interior thoroughly... glass was disgusting...

next:
GTR CAMS!!!!

[mcfly]

I walked past both of them and got into the rolla.

[Rapier46]

Right now at my house, we got my parents cars, my gtr, camry, yota, and my friends 240 were straightening out after an accident. Did a little if that today too

[natetheguy]

I started the gtr up and warmed it up, then took it for a rip around the block. warmed the tires for a second on my driveway ;) then put it away till parts arrive this week.

[Rapier46]

What parts

[Crazy 88]

Nothing :( Nobody in this city seems to carry mandrel bent tubing at a decent price. One shop said $145 for a 3 inch diameter 90 degree bend with 6 inch legs...

However I did wash my truck, forgot it was light grey.

Don't you have a Lordco? 3" mandrels are about $35 with account pricing. I think they are a Walker product. They are a 180 deg. with 6" legs. I made up an entire GTS-T downpipe with one.


Jon.

[j-ran]

I pulled the cover off mine today

[Zacho]

No, only Napa stores here in E-town :(

However today I managed to track some down. A shop let me pick through their supply and I found 3 bends they let me take them for $25...score

[bobbo]

Finished detailing the wheel wells, picked up my engine parts from powder coating, and doing some more detailing under the hood.
STILL waiting for my new wheels, tires and a load of other parts to arrive. :mad:

[mcfly]

No, only Napa stores here in E-town :(

However today I managed to track some down. A shop let me pick through their supply and I found 3 bends they let me take them for $25...score

Lordco sucks if you are a walk in customer.

I net net 30 off lordco now. I can't believe how much mark up there is in parts.

[dah_hunter]

I drove my Daily R33.

Looked at my R32 project with Shame

Ignored my R33 Project..

[natetheguy]

What parts

Have an LED dash kit coming and a new greddy full auto turbo timer II

[GRIP]

I moved the skyline to my other parking spot and took the supra out for a burn... dam I want a 3L in the skyline now

[natetheguy]

Just finished installing my tomei hicas lock kit. now for a wheel alignment.

[Funnygas]

tested out another Sirius antenna. turns out the last batch we got from Taiwan were faulty... let moisture in. cracked the old ones open.. full of rust.. tomorrow i shall rip up my interior and install the new antenna properly!

[mcfly]

tested out another Sirius antenna. turns out the last batch we got from Taiwan were faulty... let moisture in. cracked the old ones open.. full of rust.. tomorrow i shall rip up my interior and install the new antenna properly!

why not get a smaller sirius module as well :p

I have a laptop smaller then that box.

[Funnygas]

that box is hidden now, all that remains is the controller. and it was free. why pay for another when this works perfectly? and that box is small.. i'd love to see a laptop that small.

[Rapier46]

Just finished installing my tomei hicas lock kit. now for a wheel alignment.

another thing on my list

[natetheguy]

another thing on my list


:D

[bobbo]

I finished my intake manifold!
The manifold is powder coated a textured semi-gloss and I just painted (after about an 1.5 hours of prep and masking!) the throttle actuater or whatever you want to call it.

[GRIP]

Nice Bobbo, that looks minty fresh now

[natetheguy]

lookin good bobbo. want to come to calgary and do mine? ;)

[j-ran]

that looks awesome, paint chipped intake mani's really make a gtr engine bay look shitty, nice work man.

[bobbo]

lookin good bobbo. want to come to calgary and do mine? ;)

Pack 'er up and pop it in the mail! Take about a week or so. Buy me a case of beer and cover the cost of the powder coating! :D

Thanks for the comments. I'll have pics up in a few weeks once I get the clutch in and everything buttoned up.

[Zacho]

I cut my tubing and measured it up to start the making of my new downpipe.

http://i28.photobucket.com/albums/c228/thecordillera/DSC00744.jpg

[DrMango]

Good work bobbo! Looks like a very clean paint job. Going to look awsome in there!

Zacho is that pretty cost effective just building your own?

Kyle

[Zacho]

Well I was going to get someone to build it for me, but I can't stand giving someone the keys to my car. So I'm going to build the downpipe and take it to a shop come spring to join it to my exhaust.

I paid 25 for three 45 degree bends and one 90 degree. 3 inch stainless mandrel tubing, so a pretty good deal. Like $25 for a new saw blade and I have a friend welding it up for a 6 pack. That's all it cost me, cheap!

Some progress:

http://i28.photobucket.com/albums/c228/thecordillera/DSC00747.jpg
http://i28.photobucket.com/albums/c228/thecordillera/DSC00748.jpg
http://i28.photobucket.com/albums/c228/thecordillera/DSC00749.jpg

Clears the manifold really well.

[DrMango]

Looks like a nice gradual bend. Should flow nicely
Ill just stay on the lookout for a nice used one but thats cheap and its nice to say that you made it yourself :D

Kyle

[Rapier46]

I fixed my ps noise, I had relocated my res and the vacuum of the pump was sucking in the hose causing little flow and a lot of noise. Just cut up the big strong oem hose, took me 15 mins. The one that DIDNT work took like an hour haha


Took it for a run and ended up hiding from the cops.. :s

[DrMango]

Haha. Thats always good for a little raise in blood pressure ;)

Kyle

[Allan74]

Now that I finally have something to add to this thread........

What did I do today ?

I pulled out my Ignition and gave it to a buddy so that he could run his car......lol

I have now been DEMOTED down to 'Parts Car' status.....

[M13]

I fixed my ps noise, I had relocated my res and the vacuum of the pump was sucking in the hose causing little flow and a lot of noise. Just cut up the big strong oem hose, took me 15 mins. The one that DIDNT work took like an hour haha


so what exactly did you do? Mine makes too much sucking/whining noise also.

[bobbo]

After getting a bunch of engine parts powder coated I couldn't just put that grungy looking CAS back on so after a few hours with the Dremel...

[DrMango]

wow bobbo. You did a really good job on the CAS. Did you do anything special or use any compounds? All buffing pads the whole time?

Kyle

[bobbo]

Thanks! I just cleaned it with some Varsol, then used the Dremel wire wheel, then used the small and the pointed polishing pad with Autosol. Sprayed the access polish out of the holes/grooves with some MAF cleaner and used some wax to help seal it to prevent further corrosion.

[DrMango]

Nice job. Im going to copy you and do the same. I didnt even think of doing mine but Im re painting my valve covers next month anyways so I planned to have it off then

Kyle

[M13]

Looks good, I did the same but without a dremel. Hand sanding with 400, 600 then 1500, finished with some elbow grease and aluminum polish.

[Kras]

removed the a/c compressr and that stupid bracket that holds it onto the block, they weight a ton

[DrMango]

I was really surprised when I took mine off too. Anyone know whats a good way to plug the holes where the lines went into the firewall that would still look clean?

Kyle

[mcfly]

I put the tail section on the r6 and put in a new led friendly flasher relay

[Rapier46]

brake ducting on the gtr. pics in my build thread. gonna do the next is some turbo ducts. and that CAS looks great. i will do mine too.

[Zacho]

I was really surprised when I took mine off too. Anyone know whats a good way to plug the holes where the lines went into the firewall that would still look clean?

Kyle

If you have removed the whole dealio from behind the dash, I removed the grommets that are already in there and put in some rubber differential plugs from a dodge truck. worked perfect. Canuck tire should have them but I found them at napa when I was trying to do the same thing.

The truck is getting new exhaust gaskets today woo.

[Kras]

fucked around under the car with some surface rust along the pinch welds, man rust is so gay... wire wheeling it off and applying tremclad rust paint - hope it works

[DrMango]

I have rust at the jacking points and Im thinking I'll have to have that section cut out and replaced with a section from a parts car. Thats my project for the spring. Do you think that would be hard to do? I would be the front jacking points

Kyle

[Kras]

I'm sure it's possible but at the same time you have to ask yourself if it's worth it for a little rust that you can probably grind off and paint with a rust treatment

[Kras]

I will wait and if mg y rust gets back to the point it's actually spreading and causing damage to get it fixed by a body shop or something - right now its just minor annoyiance

[DrMango]

no its been crushed in from the last guy that owned the car. Its slowly started to get more rust over the last couple years because I drove my car during the winter a little last year.
The metal is bent and needs to be replaced either way. Should be pretty easy for a body shop I would guess?

Kyle

[GTR--J]

Cursed at my GTR today because my wideband is draining my battery and I had to jump start it. Then I looked at my back stock and realize how much work I have to do.
So I made a big pot of chili with a beer...... mission accomplished!

[bobbo]

Finally recieved these today!
I sorta wish I had stayed with 17s and a higher offset. I think they stick out too far. OH WELL!
Let me know what you guys think.

Rob

[Rapier46]

with the right alignment, theyll sit flush as fuck!

[bobbo]

with the right alignment, theyll sit flush as fuck!

Was it you that said you had the #'s for alignments? If so would you mind PMing them to me?
Thanks!

Rob

[Allan74]

What are the specs on the wheels/tires ?

[bobbo]

Work Emotion CR Kai 18x9.5 +20
Dunlop Direzza StarSpec 255/35/18

[Zacho]

If you ask me that is bang on. When you put the car on the ground when the suspension compresses it will fit better I figure.

Roll them fenders :D


I got started on wrapping my dash today. Half way.

[Allan74]

Work Emotion CR Kai 18x9.5 +20
Dunlop Direzza StarSpec 255/35/18

+8mm spacers all around and you are golden ;)

18x9.5 +12 is pretty much the tits, for a BNR32.....no fender rolling required.

[Rapier46]

or you could roll them and have actual good fitment.

[bobbo]

I certianly won't be rolling any fenders mostly because the paint on the car is virtually perfect and I don't want it cracked.
I won't be putting spacers in either mostly because I think they're just plain wrong and, like I said earlier, I'd like them in a bit further.
It's still going to be about another month before it's ready for the road so I'm going to leave the suspension as is, see how it settles and if it doesn't rub I may lower it some more.
Thanks for the input guys! Always appreciated!

Rob

[Allan74]

or you could roll them and have actual good fitment.

There you go again. Talking about shit that you have NO IDEA ABOUT.

Which way do you think that the spacers are going to move the wheel ?
Are you serious ? What, do you think that the spacers are going to push the wheel FURTHER INSIDE and save you from rolling the fender ? ARE YOU SERIOUS YOU STUPID FUCKING IDIOT ?

What in the fuck is ROLLING THE FENDERS going to do to help a wheel that sits TOO FAR INSIDE AND NEEDS TO BE BROUGHT FORWARD MORE ? What ? create even MORE space to fill and look worse ?

Before you make another smart ass comment and try to sting me, THINK FIRST....no please, THINK ABOUT IT.

[Kras]

you made the right choice bobbo, let me know how you like the star specs, they are spoed to be naice

edit: rapier and allan... this has been bugging me for a while - who is top and who is bottom?

[bobbo]

you made the right choice bobbo, let me know how you like the star specs, they are spoed to be naice

edit: rapier and allan... this has been bugging me for a while - who is top and who is bottom?

I actually did LOL!
... and thanks I letcha know!

[DrMango]

I think they look really good bobbo. Im really impressed with your wheel choice. Hoping for some full car pics when shes on the ground

Kyle

[bobbo]

I think they look really good bobbo. Im really impressed with your wheel choice. Hoping for some full car pics when shes on the ground

Kyle

Thanks a lot Kyle. It was a shitty experience but getting some positive feed back from the community certianly helps.
I'll have some pics up around the end of march/early april once she's all buttoned up.

Rob

[M13]

changed oil.

Now I'm using Shell Rotella T 15W40 with EOS.


epic win. under 40 bux oil change? more WIN.

[natetheguy]

installed half of my turbo timer in my car yesterday.... pics in my build thread

[christ.deyoung]

There you go again. Talking about shit that you have NO IDEA ABOUT.

Which way do you think that the spacers are going to move the wheel ?
Are you serious ? What, do you think that the spacers are going to push the wheel FURTHER INSIDE and save you from rolling the fender ? ARE YOU SERIOUS YOU STUPID FUCKING IDIOT ?

What in the fuck is ROLLING THE FENDERS going to do to help a wheel that sits TOO FAR INSIDE AND NEEDS TO BE BROUGHT FORWARD MORE ? What ? create even MORE space to fill and look worse ?

Before you make another smart ass comment and try to sting me, THINK FIRST....no please, THINK ABOUT IT.

ROFL!
...you tear into that guy a lot.

[Zacho]

By pure blind luck I got the wiper wiring right on my car today.

Measured/mocked up wastegate dump
mocked up/cut fittings for intercooler piping for the IAT and AAC.
tapped the compressor housing for the wastegate pressure source
placed wideband O2 in finally

some more little things but it should be on the road just in time :D

[DrMango]

Worked on my friends HCR problem child for 3.5-4 hours today trying to get a blown coolant hose fixed under the plenum. Then realized the reason his hose blew was because his electric fan was hooped. Then we fixed that and then tried to fix his hooped starter. Dont buy 4-5k Skylines

Kyle

[Sub Boy]

....Not quite today, but my new Tein Mono-Flex shocks have arrived (ordered them 8 weeks ago!) so the Tein SuperStreets will be coming off, My partner will just have to adjust her bra straps a bit tighter now! LOL!

[natetheguy]

....Not quite today, but my new Tein Mono-Flex shocks have arrived (ordered them 8 weeks ago!) so the Tein SuperStreets will be coming off, My partner will just have to adjust her bra straps a bit tighter now! LOL!

i'm jealous.....wish i could have you super streets lol


Just finished installing new guage/Aircon led's. they are looking very nice.

[Devo]

Just looked at her under the car cover. Moving in a couple weeks as she will have a garage to park in.

[Supraclean]

Took the car cover off and sit in it for a good 15minutes. The squash air freshener brings back good memories. Disconnected Stock runners to test fit front face plenum/throttle body. Next on the list is clean up throttle cable and attach injectors/rail.

[DrMango]

Installed my Tomei Z32 MAF harness adapter and put my washer fluid bottle in the stock location. Looked like a pain in the ass to re route the wiring for the bottle to the trunk so I didnt even bother

Kyle

[mcfly]

I put summers back on the gtst last night
Also removed some of the parts i had in storage in the gtr.

I had the trunk packed when i brought it out.
Took off the front enkei's and am going to take the tires and wheels to get mounted. Need to find a good safe shop to take them to. was a busy night last night.

[dah_hunter]

Sold my one R33 last night,,
Put a new battery into the Evo so it would start
putting a rad in my other R33 tomorrow.
Then Driving that one..

[mcfly]

batteries are over rated

[Kras]

bought some hose for my power steering lines,

[natetheguy]

turned on the gtr, warmed it up, and moved it from one side of the garage to the other....lol

prep for working on it later.

[christ.deyoung]

I removed all the valve train gear, as well as metal from the head to make room for the high lift Procams.

[bobbo]

When do you figure you'll have that hotrod together? We're talking about getting a bunch together and making a big presence at the Woodside show some thursday night.
It'd be good to meet some of the NS guys/girls too.

Rob

[christ.deyoung]

Haha...MIGHT be able to show up in the turbo civic, but the GTR probably won't be ready until June or so... :(

[bobbo]

Got my OS Giken twin disk, Splitfires, braided clutch and brake lines and a bunch of other stuff today from ZTune.
I'm having the car taken to the "AutoClub" I have access to through work to swap the clutch and do some other work this weekend.
It's a great perk for military members, completely kitted out with hoists, spray booth, and virtually every tool you can think of.
I plan on taking pics of the clutch xplant so others can see what's invovled.

WISH ME LUCK!

Rob

[DrMango]

wish you luck!

Kyle

[bobbo]

wish you luck!

Kyle

Thanks Kyle!
Spoke to a teck at ZTune and apparently the worst is getting the top starter bolt out. My intake manifold, starter and some other parts have already been moved so I guess it shouldn't be too bad.
Will post pics soon!

Rob

[DrMango]

the top start bolt isnt bad with a lot of extensions and a swivel knuckle thinger

Kyle

[Smokey89]

Tucked some wires and replaced the battery ground cable.

[M13]

got some more work on the R32 dash pod box. Should be finished for Golden Gardens.

stay tuned...

[j-ran]

i put the battery back in my car, only to find that the battery is dead.

[Kras]

ordered some new wheels, pics when they come in

[bobbo]

ordered some new wheels, pics when they come in

which wheels did you order? Size? Tire? Who from?

[Kras]

silver rpf1 18x10.5+15, no tires yet... I'm trying to decide on a tire size still, any help?

[natetheguy]

pulled it out into my driveway today and gave her a nice rub down with soap and water. weather was awesome so I couldn't pass up the opportunity.

[j-ran]

silver rpf1 18x10.5+15, no tires yet... I'm trying to decide on a tire size still, any help?

Im really pumped on my falken azenis rt-615. Super grippy and they don't wear too badly.

[mcfly]

Im really pumped on my falken azenis rt-615. Super grippy and they don't wear too badly.
Friends experiences with these tires has shown me I would never run them.

Zach had them on his car, we should see what he thought of them

[Kras]

Im really pumped on my falken azenis rt-615. Super grippy and they don't wear too badly.

My car had some 615's on it when it came over from japan land, they were pretty worn so I can't comment too much but they seemed to grip nicely. I do love their tread pattern as well. Unfortunetly I can't find any good suppliers for them, all their prices are out of whack... I'm considering the hankook ventus evo v12

[326_godzilla]

visited the car last night, put inside the car parts to be installed, just preparing...

- HKB Boss hub
- MOMO steering wheel
- shift + ebrake boot
- NISMO shift knob *installed

sourcing out:

- alarm
- HIDs
- license plate relocator

[mcfly]

My car had some 615's on it when it came over from japan land, they were pretty worn so I can't comment too much but they seemed to grip nicely. I do love their tread pattern as well. Unfortunetly I can't find any good suppliers for them, all their prices are out of whack... I'm considering the hankook ventus evo v12

imageinmotion?

They did take 3 week to get my 295/20/18's but that was due to their special size nature.

[Zacho]

Friends experiences with these tires has shown me I would never run them.

Zach had them on his car, we should see what he thought of them

I thought they were an OK tire and that is it. I ran starspecs I borrowed for a few weeks and they were much much better. But for the price, I think they are bang for the buck. However the 615 were way better than the fk452s I had as well. This year I'm looking into some of those BFG KDW tires.

I put my back seats back in last night. I sat in the back and felt like a dictator. I also set up my ECU for boost control...should be interesting.

[Kras]

I dunno man tireracks prices seem unbeatable...

[Rapier46]

I'm going for a drive in m gtr. Bc maybe. Highway 1 is closed from field to golden though :(

[j-ran]

I dunno man tireracks prices seem unbeatable...

wheelsnext has really low pricing, but I think customs brokerage and duty or whatever might ruin your margins. 1010tires is based in vancouver, their prices are a bit higher, but low hassel.

I'm starting to hear about bridgestone potenzas being really good tires, just off hand the model i can think of is re01-r or something that people were running at autocross.

[Zacho]

^ This man speaks truth.

I order from 1010 simply because tires are at your house in 2-3 days no matter how you ship them, and NO brokerage ever. Although I have heard tire rack doesn't either.

I got my wideband 100% working with my ecu and gauge now.

[mcfly]

does 1010 ship out of canada?
as in from canada to canada?

[Kras]

tirerack calculates the brokerage etc in the total price when you go to checkout

prices for hankook ventus v12 evo @ my door in 285/30r18

tirerick - 1,041.42 CAD
1010tires - $1,333.62 CAD

not even gonna bother with wheelsnext as their website is fucking dumb to navigate

[whiteboy87]

removed power steering pump and ac pump, removed rear fins of power steering pump cause hicas is coming out, as for the ac thats outa there and not going back in :D roll cage install next week and proably pulling off the turbo to put in a new exhaust manifold gasket

[Zacho]

does 1010 ship out of canada?
as in from canada to canada?

Based in vancouver. They are quick, and reply to emails within 2 hours all the time for me. When I ordered the winters for my truck the supplier was out and they still got to me in 4 days.


I did a LOT today whoa.

On my car I got the IC brackets finished up, interior is in, wastegate plumbing all done, base timing set PROPERLY, vvt setup on the ECU and the wiring for the boost controller all sorted.

I wired a relay on a friends supra for the fuel pump, and wired up a stepper motor.

[bobbo]

Had my car flat decked to the autoclub and my father and I put a new OS GIken twin disk in. Sadly there was a NISMO twin disk in there reduced to dust! Also put all new stainless lines in.
Should only be another few weeks before she's alive again!

[Kras]

looped rear PS line through cooler, installed new shift and ebrake boots, removed front fenders and found what looks to be after market chassis braces (see car thread for pic)

[bobbo]

silver rpf1 18x10.5+15, no tires yet... I'm trying to decide on a tire size still, any help?

10.5 rim? what width are you planning going with? I've got 255s on a 9.5 and I could have easily gone with a 9".

[Kras]

probably 285/30 trying to decide between 30 and 35 profile

[Rapier46]

I did not much really. Cleaned up the garage, shortened catch can hose. Had it lifted up all day for no reason haha. Next is some weight reduction.

[natetheguy]

I did not much really. Cleaned up the garage, shortened catch can hose. Had it lifted up all day for no reason haha. Next is some weight reduction.

fatty

[mcfly]

I didn't do anything to my cars today.
put my front wheels back on the gtr today.

Have been dreaming of the electric power steering pump i want to fit. looks promising, i could sell kits after the first one.

[bobbo]

probably 285/30 trying to decide between 30 and 35 profile

Don't know why you wanna add so much unsprung mass to your car. If you're just going for a look then fill your boots. If you're looking for grip that's not the best way to do it.
Your speedo will be close (assuming an 18" wheel). You'll only be out about .5% in your overall diameter.

[Rapier46]

More tire=more tread contact=more grip, right? But more tire=more weight.


Or should you be mathing the tire size, to weight of the car, and any extra tire, will end up extra mass to control, and it will throw the grip to weight ratio off?

[M13]

More tire=more tread contact=more grip, right? But more tire=more weight.


Or should you be mathing the tire size, to weight of the car, and any extra tire, will end up extra mass to control, and it will throw the grip to weight ratio off?

and yes, wider the tire does not mean better anyways.


Garage Saraus did a crazy lap on BNR32 with 265's I believe.

Mines R34 had 255/265 and appeared to have more than enough grip for circuit racing.

[Rapier46]

Yeah I guess. With the right tire in the right surface. I need to know what tires I should buy. I have no idea.

[natetheguy]

Yeah I guess. With the right tire in the right surface. I need to know what tires I should buy. I have no idea.

get bigger rims and slap some 255's or 265's on there

[Rapier46]

Not that simple

[GTR_Russ]

Engine got dropped off at shop on weekend. Pulled off the intake manifold and throttle bodies today at lunch. Going back tonight. Hopefully have the bitch tore completely down by the weekend.

[bobbo]

Yeah I guess. With the right tire in the right surface. I need to know what tires I should buy. I have no idea.

Here's mine with 255/35/18s on 18x9.5 with a 20mm offset. The tires are Dunlop Direzza StarSpecs.
This was saturday when we were taking it to put the clutch in. Give you an idea for fit atleast.
Yea I know it's sitting funny. The suspension is compressed from being strapped down.

[j-ran]

started my car today, and drove it into the carport. work on the driveshaft steady bearing to commence soon.

[mcfly]

is that a drive shaft repair jordan?

bobbo, i love those wheels.

[Kras]

Don't know why you wanna add so much unsprung mass to your car. If you're just going for a look then fill your boots. If you're looking for grip that's not the best way to do it.
Your speedo will be close (assuming an 18" wheel). You'll only be out about .5% in your overall diameter.

according to tire rack your 255/35R18 weigh 27 lb each

the tires I am thinking of getting in 285/30R18 also weigh 27 lbs

[Kras]

today I cut a piece of aluminium and put it into my divided turbo pipe, that was a bitch

[bobbo]

according to tire rack your 255/35R18 weigh 27 lb each

the tires I am thinking of getting in 285/30R18 also weigh 27 lbs

Good to know. I vowed that I'd stay with 17s to save weight but for some reason I got carried away and ended up with what I've got now.
That being said... IMO you don't need tires that wide to get more traction.
I think you'd be better off spending the money on suspension upgrades or a torque split controller to get better handling.
Also with looking at what I have left for space you're gonna have to be rolling lips, probably rubbing at full lock (probably before) and hydroplaning like crazy.
If you're looking for best performance take a look at what the time attack cars are using for tire sizes. I think you'll see most cars staying with a 40 series.
My 2 cents worth!

[Zacho]

Bobbo, let me know how you like the OS twin I want to know what you think. I've got one...and well...I'll let you find out :D


Today I got my friends 1j supra running.
My car comes back to edmonton in two weeks!

[M13]

cleaned underbay abit, light dusting off and prepped for some polishing/cleaning later this week.

Vacuumed carpets but needs armorall on interior.

[driftmonger]

but needs armorall on interior.
regular armorall is a bad choice for some things as it's known to sun bake and cause the cracking in some dashes. Need more wax and less oil.

[j-ran]

is that a drive shaft repair jordan?

bobbo, i love those wheels.

that bracket with the bearing in it that hangs down... the bolts are stripped to put it back in its place. And the studs that come out of the dump pipe to the down pipe are not threading on either. but i bought some metric taps and dies so hopefully i can repair those.... also I need a new tune

[bobbo]

Bobbo, let me know how you like the OS twin I want to know what you think. I've got one...and well...I'll let you find out :D


Today I got my friends 1j supra running.
My car comes back to edmonton in two weeks!

I'll post something up on here in about 3 weeks. Better still PM me and I'll save it to reply once I do get a chance to try everything out.
From all research I've done I think you would be pretty happy. Just make sure you get the right throwout bearing. The OS Giken clutches need a different size.

[Kras]

Good to know. I vowed that I'd stay with 17s to save weight but for some reason I got carried away and ended up with what I've got now.
That being said... IMO you don't need tires that wide to get more traction.
I think you'd be better off spending the money on suspension upgrades or a torque split controller to get better handling.
Also with looking at what I have left for space you're gonna have to be rolling lips, probably rubbing at full lock (probably before) and hydroplaning like crazy.
If you're looking for best performance take a look at what the time attack cars are using for tire sizes. I think you'll see most cars staying with a 40 series.
My 2 cents worth!

You're right wider doesn't mean better handling it just looks cooler :)

I'm considering running 265/35 now with a bit of a stretch actually... seems like a lot of guys in japan run that size for time attack

Also your star specs are a really nice tire, which is why I'm stepping down in size a tiny bit so I can buy a way nicer tire

[M13]

regular armorall is a bad choice for some things as it's known to sun bake and cause the cracking in some dashes. Need more wax and less oil.

back it up please.

" Original Protectant
New! Improved UV Protection Armor All® Original Protectant


The formula that sparked a revolution has just been revolutionized.
Who says you can't improve upon a classic? Now Armor All® Original Protectant is even better! For generations, Armor All® has been the undisputed leader in protection, defending your vehicle from harmful elements like UV and oxidation. Our improved, thicker formula provides enhanced control, a nongreasy finish and a deeper shine. All this plus even better UVA and UVB protection, which you have relied on for years to preserve the natural beauty of your vehicle.


Helps prevent cracking, fading, discoloration and premature aging
Brings out a beautiful, deep shine with a nongreasy finish
Safely cleans away dirt, dust and debris
Renews and revitalizes vinyl, rubber and plastic"

[driftmonger]

Original Protectant but New! Improved UV Protection ? I wonder why they decided to do that.

How can it be Original and New at the same time ?

[Rapier46]

I still do not know wha. Tires to get. Haha. What are good people?

[driftmonger]

What is your budget and what size are you going to run ?

[M13]

Original Protectant but New! Improved UV Protection ? I wonder why they decided to do that.

How can it be Original and New at the same time ?

Hey man, I've been using it for two years on my car after a long search of what to use (asked detailers, show car owners)

Hasn't made my car interior bubble nor crack. I put nearly 35,000KM.

Isn't that enough proof?

[inhumane]

got bolts for my seatbelts and put em in!!! finally they all work

[M13]

Replaced turbo coolant inlet with AN-6.

Two more lines to replace then my engine bay should be done as I picture it in my mind. (as far as hoses go)

[natetheguy]

took it out for a spin to calgary and back. stopped at wendy's and went through the drive though backwords :p

[Zacho]

I'm doing some street tuning today...fingers crossed nothing blows up.

[bobbo]

All the hydraulics are flushed and blead. Split Fires are in and I cleaned and re-gapped the plugs. Just waiting for my Samco hoses and cam cover grommets to get here and I can button the rest of the engine up. Then it's just a coolant flush, oil flush and change, tranny fluid change, diff oil changes, xfer case fluid change and she'll be ready to go!
BTW if you have a lot of cars to maintain or you change brake fluid often this is a rig you need to have, takes NO TIME to do a fluid change.
http://www.eurosportacc.com/motive_power_bleeder_brake_line.htm

[christ.deyoung]

Took the turbo civic out from hibernation...worked good! Glad to have boost again, as the GTR won't be running again for another few months.

[Zacho]

Close!

http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs424.snc3/24495_371172452100_641342100_4090645_6401085_n.jpg

[inhumane]

Took the turbo civic out from hibernation...worked good! Glad to have boost again, as the GTR won't be running again for another few months.

EG? what motor? B18?

[christ.deyoung]

EG? what motor? B18?

EK Hatch GSR B18C...GT35

[mcfly]

Close!

http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs424.snc3/24495_371172452100_641342100_4090645_6401085_n.jpg

your exhaust is so straight. you are so lucky

[inhumane]

EK Hatch GSR B18C...GT35

nice! maybe shoot a pic up if possible, i quite fancy well done hatch civics

[inhumane]

checked plugs and ordered new ones, cleaned up the coils, oil change, and replaced all boost lines which were mostly cracked and old

[Rapier46]

Went to look at my next possible gtr!

[mcfly]

checked plugs and ordered new ones, cleaned up the coils, oil change, and replaced all boost lines which were mostly cracked and old

you ordered new plugs? why not just pick them up at napa.

I drove my car today:p

[flipridah17]

Bought new Spark plugs
Bought new 6 puck Clutch, & pivot
Replaced speed sensor, repaired wiring
Bought new Deck
Bought Nismo suspension + tension rod bushings.

Now i feel so broke.. and cant even drive my car (yet) :P

[inhumane]

you ordered new plugs? why not just pick them up at napa.

I drove my car today:p

we dont have napa here but i ordered through lordco LOL


those dumbasses didnt have any in stock

[inhumane]

Bought new Spark plugs
Bought new 6 puck Clutch, & pivot
Replaced speed sensor, repaired wiring
Bought new Deck
Bought Nismo suspension + tension rod bushings.

Now i feel so broke.. and cant even drive my car (yet) :P

what clutch? i need a new one, im getting ALOT of clutch slip under full boost

[M13]

I got rid of some boost leak.

Seems that I am leaking from injector to manifold as Deatschwerks' supplied seals are too short and don't press firmly against the manifold.

Is it normal to see some leak? I'm not losing much, just a nice and slow hissing leak.

[mcfly]

you shouldn't leak, and as the injectors sit there the seals typically squish down even more.
we dont have napa here but i ordered through lordco LOL

those dumbasses didnt have any in stock
lordco is quite something. the average part has 50% markup over what "cost" is. And that is not their cost, that 50% is over and above their share.

[inhumane]

you shouldn't leak, and as the injectors sit there the seals typically squish down even more.

lordco is quite something. the average part has 50% markup over what "cost" is. And that is not their cost, that 50% is over and above their share.

i never ever buy something without a discount, i use my buddys shop discount for everything, and even then its junk...i hate lordco but its slim pickens on this island unless you wanna drive for a bit to one decent place we have here

[flipridah17]

As per Ztune this one is the best bang for your dollar.. I paid 450ish..

RPS Max 6-Puck Clutch KIT

When I finally have free time, I want to paint my engine covers candy apple red

[bobbo]

what clutch? i need a new one, im getting ALOT of clutch slip under full boost

I`ve got a used Nismo Gmax twin disk. Needs to be machined and new friction disks. Probably run you about $1300-$1400 ready to put in the car. Sells for about $1800 new.
GTRPWR Forums

PM if interested.

[M13]

you shouldn't leak, and as the injectors sit there the seals typically squish down even more.

lordco is quite something. the average part has 50% markup over what "cost" is. And that is not their cost, that 50% is over and above their share.

Hmm.. Looks like I have to get some OEM bottom seals.

It's not squishing as it should, it still has a good .5mm play opposed to a nice squeeze.



So, for tech info. Ask for OEM o-rings with your deatschwerks injectors.

[Zacho]

Today I just want to light it on fire, probably good I'm not near it at the moment.

inhumane: those RPS clutches seem like very good bang for the buck. I was going to get an ACT 6 puck sprung with the best pressure plate from them for an N/A 300zx and it was still pretty cheap. If I didn't get my OSG i would have got one of the two.

[inhumane]

i washed my piece of poo and now it looks nicer

[j-ran]

I've been trying to fix my car for a while now... It runs, but I can't really drive it.

I'm not going to mention any names, but last time I went to work, I left a non running skyline in my parents driveway. I had just done the meat of the engine swap, but had a few small things to button up. My parents demanded that the car be moved, so i got a friend to come over and finish up what needed to be done and move the car.

Well, now that I'm back and trying to figure out what happened, I'm finding that every piece of hardware is stripped and crossthreaded... I'm so pissed. The most important piece is the Driveshaft bearing that bolts to the bottom of the car before the U Joint in the shaft. I was able to re-tap the hole on one side and get the proper bolt in there, but the other side has a threaded stud that is part of the chassis. This thing is ruined! At what point do you finally realize that you shouldn't need 100 foot pounds of tourque to turn the nut onto the first 4 threads? I might now have to weld the thing to the bottom of the car because i cant re-thread this thing, it's too far gone. The problem is that I can't drive the car with the driveshaft flopping around under there, so I need a welder to come to me... I don't know what I'm going to do, but I go back to work on April 12th and I can't leave my car in my parents driveway again.

/rant

[Zacho]

I've been trying to fix my car for a while now... It runs, but I can't really drive it.

I'm not going to mention any names, but last time I went to work, I left a non running skyline in my parents driveway. I had just done the meat of the engine swap, but had a few small things to button up. My parents demanded that the car be moved, so i got a friend to come over and finish up what needed to be done and move the car.

Well, now that I'm back and trying to figure out what happened, I'm finding that every piece of hardware is stripped and crossthreaded... I'm so pissed. The most important piece is the Driveshaft bearing that bolts to the bottom of the car before the U Joint in the shaft. I was able to re-tap the hole on one side and get the proper bolt in there, but the other side has a threaded stud that is part of the chassis. This thing is ruined! At what point do you finally realize that you shouldn't need 100 foot pounds of tourque to turn the nut onto the first 4 threads? I might now have to weld the thing to the bottom of the car because i cant re-thread this thing, it's too far gone. The problem is that I can't drive the car with the driveshaft flopping around under there, so I need a welder to come to me... I don't know what I'm going to do, but I go back to work on April 12th and I can't leave my car in my parents driveway again.

/rant

I sorted the same issue a few weeks ago on a gts, I just drilled his hangar bracket out, and drilled the chassis and re-tapped larger. I think it was m12x1.5 I tapped it? Don't quote me on that size but it is totally fixable.

Since said person I helped originally screwed it up, he never bothered to fix it for almost a month (Yes. I KNOW, wow.) And drove it like that for a month. If he can do that, I wouldn't be too afraid to move the car very briefly with one bolt in. Super sketchy...but do able.

[mcfly]

Jordans issues is the threaded stud on the carrier bearing assembly.

The one with the welded nut in the chassis is all good now that he tapped it.

[Coolwhip]

remove spare boxes sitting on top of it :( I really need to get cranking on it again

[Funnygas]

mmm.. Polished the car. One thing to note. Dirt hides shit.. door dings.. little dents.. Kinda ruins the buzz from a freshly polished car to find a lot of that shit.. :(

[mcfly]

I need to put my bike together
hopefully my new helmet arrives for the second time in better condition.

And install the ams arms on gtr/buy traction rods.

[bobbo]

I need to put my bike together
hopefully my new helmet arrives for the second time in better condition.

And install the ams arms on gtr/buy traction rods.

Need some boots to go with that helmet?
http://halifax.kijiji.ca/c-cars-vehicles-motorcycles-motorcycle-parts-accessories-Puma-Motorcycle-Boots-sz-12-W0QQAdIdZ193485388

[mcfly]

not a fan of pumas, nor big foot feet.
and i have good boots i bought last year ;)

[M13]

SO yeah OEM seals > Deatschwerk seals.

I have virtually no boost leak other than my manifold gasket. Speaking of which, OEM paper sucks balls. I'm ordering some phenolic gaskets to reduce intake temp and never worry about blowing out gaskets from only 18PSI.

[j-ran]

I stole charlies tune tonight, so my car will be mobile soon. Not driving on the tune that blew my previous motor was a key issue for me lol!

[RABBIT]

started installed on my twin oilcooler set up , connected vacuum lines , rewired plugs and re-rooted my throttle cable for the plazmaman plenum .

[christ.deyoung]

I need to put my bike together
hopefully my new helmet arrives for the second time in better condition.

And install the ams arms on gtr/buy traction rods.

What kinda bike?

[mcfly]

I stole charlies tune tonight, so my car will be mobile soon. Not driving on the tune that blew my previous motor was a key issue for me lol!

lol ;)

What kinda bike?

r6

[GRIP]

Started on my gauge / ignition panel... hmmm to use fused switches or not ? either way they will be fused at the switch or the source.

[Rapier46]

washed it, fixed a little rattle...


fixed a whole bunch of vacuum leaks yesterday with nate. now it runs back down at 7psi, compared to the 14 i was at

[GTR_Russ]

ordered some parts from ebay.... I feel so dirty....
facepalm
The funny thing is that I know better but I just don't care lol... nothing like setting up for failure.

[christ.deyoung]

ordered some parts from ebay.... I feel so dirty....
facepalm
The funny thing is that I know better but I just don't care lol... nothing like setting up for failure.

What kind of parts?

[GTR_Russ]

Obx turbo headers and dumps gonna give them a try. They are cheap enough and I'm gonna get them re-welded before I install them. Oil line feed kit and water line kit, more interested in the fittings then the lines. Nothing major like an oil pump or air filter.

[inhumane]

replaced somemore cracked vaccum lines and installed the new plugs, rides like a charm now...Southie helped me out huge

[Zacho]

I bought 3 feet of -12AN hose. Goodbye $52.12.

It is the only hose that will work properly for my oil drain hose...so I have no choice.

[RABBIT]

I bought 3 feet of -12AN hose. Goodbye $52.12.

It is the only hose that will work properly for my oil drain hose...so I have no choice.

sucks , at least itll be worth it though .
un like me buying 4 fittings at 20 each and no longer being able to use them = FAIL

[nic-skyline]

today i installed my new dvd deck, cleaned the inside and outside, tried to fix my turbo timer but no success(will try tomorrow)

[Rapier46]

I got all the wheel locks off. Pain in the pooer. And washed it, and random other stuff. Worked on some electrical bs.

[M13]

fuel line clamp loosened off of pump outlet, lost about 17 L of fuel.

Fixed it off the side of the road then filled 20L to re-check my MPG.

fuck I lost at least 150km worth of fuel.

[Supraclean]

Yo Rabbit did you buy 8 10 or 12 An?

[natetheguy]

recently did a compression test to my GeeDeeArr

1: 125psi
2: 130psi
3: 128psi
4: 127psi
5: 126psi
6: 120psi

I'm quite happy with those numbers. the engine wasn't fully warmed up either.

[Rapier46]

we should do it again with it all warmed up, and how it specifies in the service manual. maybe mine will get higher numbers.

[Kras]

I wouldn't even worry about compression unless the engine isn't running properly... it's gonna blow up sooner or later so just let it be haha, thats the way I look at it anyways

[Rapier46]

We weren't really concerned, just wondering. Because this guy said my engine had 'problems'. Still pulls smooth, and nates pulls hard as hell!

[rb-racer]

I went and dug my car out of storage. took it home on a trailer, needs a wash now

[Kras]

ordered tires

[Spades]

Cleaned my MAF's

[Rapier46]

Took neighbor kid for a ride. Did a fun launch

[Zacho]

I picked up a filter, and got new plugs for it today.

Solved my cold start issue as well wooo.

[Stefan_001]

I called my machine shop to find out the status of my block. Long way till startup :( looking for sponsors lol.

[Snow]

New Splitfire coil packs in last night. Got a great deal from Ztune.

Dayum.

Feels awesome. I had a misfire at about 4k and 10psi. This fixed that. Now I just need to turn that bitch back up to 15psi and we're in business.

[Rapier46]

Yes! ^^^^


Today we did springs on Nate gyr, and I fuxke with my catch can some more

[Nikel]

http://www1.garaget.org/gallery/archive/23965/894299_12vv28.jpg

Did a bit of furbish

[bobbo]

Didn't work on my car but changed the timing chain on my Dads '71 383 cu.in. Plymouth Road Runner.
God I wish my car was that easy to work on!!!

[Rapier46]

i hear ya man^^ i worked on my friends sr20....god damnit...so simple.

[mcfly]

I pulled the transfer case out from storage. I will be disassembling it tomorrow as I want to order new parts.

[Kras]

star specs came in today, gonna mount them onto rims on sat then take some pics

[Rapier46]

What about rpf01????

[Kras]

What about rpf01????

rpf1 have been sitting in my garage waiting for tires lol

[bobbo]

Go beat on them and tell me what you think. Mine still haven't touched ashphalt! :mad:

[Rapier46]

rpf1 have been sitting in my garage waiting for tires lol



God damnit! I still want.

[Kras]

Go beat on them and tell me what you think. Mine still haven't touched ashphalt! :mad:

I'll let you know for sure, although it might be a little while before I'm on the road as well.

God damnit! I still want.

your red GTR would look like sex w/ black rpf1

[Rapier46]

Yeah, the white one too. I just like black wheels hehe. I've been looking for tires today, with a 275 40 17, the overall height is just over 35 inches. Sound like too much? The sidewall is 4.33 inches. Sound like too much? I got 17x9, and am having trouble finding 275 35, or 265 40

[Snow]

275 is pretty big for 9" wheels isn't it?

I'm running 235 on my 17x8. Wanted to do 245 but didn't. Since there's 24mm in an inch I guess you could go up that far. It would be a tight fit though.

Best of luck. And pics when you git 'er done.

[Kras]

I ran 255/40 on my 17x9 and they fit nicely - I don't think I'd go any bigger on a 9" rim.

[Rapier46]

25.4 mm actually.


I have 275 ready to put on my 9s

[Kras]

25.4 mm actually.


I have 275 ready to put on my 9s

post pics when mounted

[Zacho]

Was supposed to pick my car up...but edmonton got snow. faaaaaaaaail.

[Rapier46]

i just went snow drifting in the whitey! biig open parking lot was a COMPLETE sheet of ice. not one square inch or dry. i did a whole shit load of driftin yaya

[mcfly]

25.4 mm actually.


I have 275 ready to put on my 9s

those will be funny looking. aka buldgy

[Rapier46]

they were on 7's

[mcfly]

then they will look less funny, but bulgy none the less

[Rapier46]

Teehee. We'll see. 275/25.4= 10.8 inches of rubber. Won't be too bad.

[Snow]

Put in a new deck today. Looks/works sweet.

Pulled out one of my electric rad fans. The fan was held in place by the foam cover on the lower AC line, and it unsrewed the nut. Then proceeded to bounce the nut and fan around fucking up a ton of fins on my rad before I noticed the horrible sound while the car was timing out. Fucking piece of shit. Now I'm running 1 12" fan til I pull the rad to remount it. Fucker. (I'm angry).

Then I mounted my red titek extended/open-ended studs, and decided I didn't like them, so I took them all off.

Then I took my sub out of my brothers car and put it back in mine. Bastard kept trying to keep it.

And along the process of wiring up the sub and grabbing random shit out of my trunk and putting it in the garage I managed to notice that the car has Kenwood components in the rear. Pretty pumped about that.

[Rapier46]

Nate and I put the transmission back in my truck. Awesome.

[Zacho]

Got my exhaust done, and managed to ruin something on it asap. I only had an a/m 2.5 inch dp last year never hit anything. 3 inch...no dice. Guess I'm stuck moving all this farther back. what a pita
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs470.ash1/25785_376540392100_641342100_4232849_7201595_n.jpg

[Rapier46]

pUt a little shield under it so it can't scrape. Thick stuff

[rb-racer]

there is no way to tuck that closer to the floor board? That is how you crack manifolds quickly.

[bobbo]

Engine bay all assembled (except for fuel rail, still waiting) all new valve cover grommets, new injector seals, oil changed, ATTTESSA flushed, brakes/clutch flushed, and the intake manifold is back on. Ready to flash 'er up as soon as I get the fuel rail. Should be monday!

[Rapier46]

Get some dyno or driving vids bobbo^^^. Also, did you or do you have a white gtr? 600whp?

[dirtysky]

I cleaned it ... lol

[inhumane]

i sense some useless posting going on by you sir

[Rapier46]

look whos talking^^
;)



i need to clean mine too, its getting dirty. and i got the truck all goin tooo :)

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs463.snc3/25465_10150175776400221_579425220_11943248_4819425 _n.jpg

[GTR--J]

I thought flushing out the winter antifreeze mix for water wetter / water combo would be an easy task...nope.

After I flushed out the old antifreeze and filled it back up with water to flush the rad out again, I started up the car and my self locking doors were locked by my alarm with the engine running.....sweeeet! So no big deal I'll just use my spare key tucked away....nope......its gone now....fuck. So I unplug the maf to kill the engine and pull my fuel pump fuse because it's running full tilt. 30 minutes later with a coat hanger.......booya....I'm in!

I'm draining the water again and while I tighten the drain up I hear...ka dunk...dunk dunk. I get up to take a look and the nismo rad cap is gone...arrrggghhhhh. I looked for 45 minutes and finally give up. I have a spare rad cap in the garage, I'll just use that. I find the old stock rad....no cap. I'm loosing it at this point so I chuck the rad across the yard...what else is in my site..a fan and a koyo rad box so I chuck those too.

I call the wife out to take a look for the cap.....she finds it beside the rad by the drain cock....fuck me....it took her 5 minutes!!:rolleyes:
So I ended the ordeal with pizza and beer:cool:

[mcfly]

30 minutes, damn.

two credit cards and a wedge + hanger = like 3 minutes.

[Rapier46]

explain that more mcfly

[GTR--J]

30 minutes, damn.

two credit cards and a wedge + hanger = like 3 minutes.


I used a wedge with the hanger but it was still f#@&ing with me. I hooked on in about 10 minutes. The other 20 was spent swearing at the car while I rehooked on and tried ....tried .....tried again.:D

[Kras]

this sounds like my life everyday


I thought flushing out the winter antifreeze mix for water wetter / water combo would be an easy task...nope.

After I flushed out the old antifreeze and filled it back up with water to flush the rad out again, I started up the car and my self locking doors were locked by my alarm with the engine running.....sweeeet! So no big deal I'll just use my spare key tucked away....nope......its gone now....fuck. So I unplug the maf to kill the engine and pull my fuel pump fuse because it's running full tilt. 30 minutes later with a coat hanger.......booya....I'm in!

I'm draining the water again and while I tighten the drain up I hear...ka dunk...dunk dunk. I get up to take a look and the nismo rad cap is gone...arrrggghhhhh. I looked for 45 minutes and finally give up. I have a spare rad cap in the garage, I'll just use that. I find the old stock rad....no cap. I'm loosing it at this point so I chuck the rad across the yard...what else is in my site..a fan and a koyo rad box so I chuck those too.

I call the wife out to take a look for the cap.....she finds it beside the rad by the drain cock....fuck me....it took her 5 minutes!!:rolleyes:
So I ended the ordeal with pizza and beer:cool:

[mcfly]

explain that more mcfly

you put the two cards together between the window and the seal. you then push a wedge shaped object into them. this saves the seal.
you can also use the tow truck driver deluxe air bag tool.

you then straighten out a hanger, double bend the end for strength and put a curve into it. Leave the hanger hook in tact for a handle and unlock car.


I never had issues hooking the lock, just opening so I adapted.

[superdaveosbourne]

Changed the oil and drove around.

[Rapier46]

I cleaned the inside of the whitey

[natetheguy]

took the GTR for a spin tonight and filled it up with a fresh tank of gas. got it ready for my edmonton trip this weekend. when I was checking under the hood i noticed that my injectors have finally stopped leaking after fighting with them since I brought the car over from Japan a year and a half ago. :D

[Rapier46]

NO ONE GIVES A PISS^^^^^^^^^^^^^^^

[natetheguy]

NO ONE GIVES A PISS^^^^^^^^^^^^^^^

the forum clown has spoken......

hey jimbojones, can you pass some of that koolaid over to jamie?

[Rapier46]

The forum mooch has spoken.....


I'm serious about dat koolaid!

Where's da grape soda, and fried chikin!!

[natetheguy]

The forum mooch has spoken.....


I'm serious about dat koolaid!

Where's da grape soda, and fried chikin!!

forum mooch? lol care to elaborate?

i loves mah grape drank

[Snow]

I murdered my front lip.

[Rapier46]

shiiitttt how^^

[M13]

shiiitttt how^^

concrete + fiberglass = ouch.

[DrMango]

Didnt Snow have an OEM plastic GTR lip?

Kyle