Power FC default

[tazsgtr]

I have a power fc l-jetro and depsite the fact that I try to initialize the setting to default, it seems to retain all the changes.

Does anyone know the default ignition map, injector map and airflow setting?

Thanks

[Allan74]

Just reload a basic l-jetro map and call it a day. I recall other guys having a similar problem when it came time to sell.

Also, please update your profile Mr.Burnaby ;)

Thanks.
Allan

[mcfly]

Are you sure you are not on the default/base map settings already? A l-jetro rb26 will run really well on the basemap even

[tazsgtr]

I don't think so, when I re-initialized it from the etc. screen it seems to have helped with my idle after I let it idle for 30 minutes but the ign map still remains the same. It seems like most of the setting didn't reset.

[rb-racer]

What kinda of setup do you have programmed into it right now
What isn't changing when you do a reset.

[tazsgtr]

I picked up a used l-jetro. Made some changes when it was installed but the big problem was detonation and it hunting for idle. So I figured I would re-initialize it. I performed the idle set up for the 30 minutes so there idle is fine now but the ign map, inj map, injector setting and air flow setting are all the same as before I intialized.