15x10 drag rims

[Stefan_001]

Whats the widest tire thats been installed without tubbing the rears?

[mcfly]

I would not go 15x10.

15x8 is the ideal rim for a BNR32. Guys are running 28x10x15 with this rim and the combo is putting them in the 7's ;)

Or put 255/50/16 on stock rims(those these will be radials such as the mt et street)

Unless you are going rwd in which case the game will change.

[Rapier46]

I have 15x10 on my Toyota truck...can I run 7s?

[Stefan_001]

i'm going rwd. if i was sticking with 4wd I would go with the stock 16's regardless.

[mcfly]

Well i'm still going to go with 28x10x15 is ideal with a 15x8.

With dialed in suspension and the right tire pressure it will hook. You will need ot roll the fenders at a minimum though.

[Stefan_001]

thats too skinny of a tire for me. I currently have 285/30ZR18(18x10.5 +22) I'm pretty sure I could sqeeze in somethings wider then a 255. I won't know till I measure up clearances. my buddy owns the prl racing S13 and its running 15x9's without a problem.

[mcfly]

a 28x10x15 has a section width of 11.9 inches(most do anyways)

That is the same as my 295/30/18 kuhmos.

You also have to take into consideration the 2.x inches of extra rolling diameter adding to the overall height within the wheel well.