Bottom/Crank Pulley/Gear Assembly

[Allan74]

Could someone please confirm the Crank pulley/Crank Gear assembly parts list please ? I don't have FAST and my 'core' motor is not complete.

- Lower Timing Gear.
- Block side timing gear wear plate.
- Balancer side timing gear wear plate.
- Crank Bolt.
- Crank Bolt washer.
- Timing Gear Keys.
- Harmonic Balancer.....

I realize this is just a little thing, but I am missing the wear plates and I don't know what else.

Also, for balancing, should I have the REAR Dowl Pin (12200J) and Bushing (32202) supplied to the builder ?

Sorry for being a pain, I am just in a position where I am ordering everything 100% brand new where/when applicable.....for added peace of mind.

Thanks,
Allan

[Allan74]

Found this...

http://www.gtrpwrgtrpwrgtrpwrgtrpwrgtrpwrgtrpwrgtrpwr.com/downloads/pics/FAST/fast_crankshaft.gif

[mcfly]

do you need the part numbers or are you ok there
you listed all the parts on the nose.

[Allan74]

I forgot to order the timing gear wear plates, so need part#'s for:

- Block side timing gear plate (13021E).
- Balancer side timing gear plate (13021F).

......along with (as shown in the image above):

- rear bushing (32202).
- rear bolt (12310A).
- rear dowel pin (12200J).

Thanks,
Allan

[mcfly]

crank bolt - 12309-05U00-
bolt washer - 12308-05U00-
harmonic balancer - 12303-05U01-
forward timing belt plate - 13023-05U10-
timing belt lower gear - 13021-05U10-
rear timing belt plate - 13022-05U10-
woodruff keys - 00926-51600- (appears part number = 2 under same number)
crank shaft flywheel dowel pin - 13032-18000-
pilot bushing - 32202-B9500-
flywheel bolts (need 6) - 12315-04U00-

[m_melen]

so can you just walk into a nissan dealer in the north america, give them those numbers, and tell them you need them ordered from nissan japan?

[Allan74]

Most, I am sure will. Some may not. It probably depends on how much of a tight ass the parts desk manager is. Check first.