RB Oil Filter Stud

[mcfly]

Just throwing this out there for any of you.

you can throw the oil filter straight onto the block here if needed.
Not recommended this is more for building a slimmer oil cooler setup as you can get rid of the oil filter pedestal with built in heat exchanger.

part number 15213-21001

[mcfly]

this is the stock piece on the block

[Zacho]

You can also order them from rawbrokerage.com, never knew there was a nissan part.

Getting rid of that stock heat exchanger gave me a lot more room under the intake manifold.

[rbs14]

yeah got the same part as you from Ricky at rawbrokage ... running a greddy thermo sandwitch plate and oil cooler ... alot more room under there

[rb-racer]

if i use this to get rid of my oil filter pedestal on an rb26 what do i put on after that i can run a cooler from?

[SuperHatch]

if i use this to get rid of my oil filter pedestal on an rb26 what do i put on after that i can run a cooler from?

www.batinc.net carries a large supply of anything you would need for oil filter take-off, relocation, cooling, etc.

http://97.74.103.94/files/sp1t.pdf

Look at part number SP1T... it is a sandwich plate adaptor with a built in thermostat to properly control oil temperatures. As long as the RB26 is the same as other Nissans with a filter thread pitch of 3/4-16 this will work. If not, the SP1FT is 20mm, which is the other less common Nissan size.

This of course is just an option to the all to common greedy piece.

[rbs14]

i used the greddy sandwitch plate / oil cooler for the sr20det ... but the GTR oil filter doesn't work anymore so i use a sr20 filter ... not the same thread pitch

[SuperHatch]

i used the greddy sandwitch plate / oil cooler for the sr20det ... but the GTR oil filter doesn't work anymore so i use a sr20 filter ... not the same thread pitch

Well, the SR is one of the 20mm filters, so I guess the GTR is 3/4-16 just like most other Nissans.

[Terrh]

necroposting but I always used a KA24 filter, whatever they work out to.

[Stefan_001]

If someone is looking for a smaller filter that fits the 2JZ-GTE oil filter is the exact same threads and everything. Fram # PH3614( I don't use fram personally).

[mcfly]

Anyone have a lead on a 3/4-16 stud that's shorter?

[rb-racer]

no name stud
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=360160611836

block and stud, stud looks a bit nicer
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=370320329946